Order Code: PHRXM-DBUNDLE
The Dolby Module / Option bundle (PHRXM-DBUNDLE) combines the Dolby Decode module, the 4AES Module and the Dolby metadata analysis software ideal for audio-centric installations and anywhere Dolby E, Dolby Digital or Dolby Digital Plus is present.
Dolby Decode module (PHRXM-DOLBY), as delivered, can decode a single audio channel pair containing Dolby audio data into base band audio channels. An additional Dolby Decode channel can be purchased separately if required.
The individual decoded Dolby E, Dolby Digital or Dolby Digital Plus audio channels as well as a stereo mix down can be routed via embedded audio channels within an SDI Generator output, via AES outputs on the 4AES module, via Rx 2000 front panel loud speakers, via the headphone output on the front panel of each Rx unit and via analogue audio output on the rear of each Rx unit. These channels can also be monitored using audio meters, loudness or lissajous displays.
The Dolby audio channel to be decoded can be selected from the analyser SDI input or from the 4AES module (PHRXM-4AES). The levels of the decoded base audio channels can be displayed on audio meters, loudness can be monitored, logged and the quality of the audio heard.
The 4AES module has been designed for AES audio centric installations to allows 4 x AES digital audio pairs to be routed to the Dolby Decode module, Audio Meter and Loudness instruments. The 75ohm BNC connections on the 4AES module are auto-sensing and can be used for both input and output.
The Dolby Analysis option (PHRXO-BDA) displays Dolby E, Dolby Digital or Dolby Digital Plus meta data present in a selected audio stream.This can be used to determine whether the Dolby packet, embedded in the SDI video stream, is timed correctly.
The analysis tools available with this option allow checks to be made to see that the Dolby packet has been created correctly and transferred transparently, unaffected by routers/switchers, satellite links, etc.
Dolby Bundle Specifications
|Connector||4 x BNC|
|Standard||AES3-4-2009 Annex D|
|Input Impedance||75 ohm terminated|
|Input Return Loss||Better than 15dB (5MHz-1485MHz)|
|Maximum Input Voltage||+/- 2V|
|Input Sample Rate||32kHz to 192kHz|
|Output Sample Rate||48kHz|
|Input Bit Depth||20bit or 24bit|
|Output Bit Depth||24bit|
For Product support please contact your distributor at the place of your purchase. Should the product be beyond their repair assistance the distributor will contact the PHABRIX Support Team on your behalf.
A summary of PHABRIX’s warranty is given below. The detail of PHABRIX’s warranty is included on the web-site under Terms and Conditions.
Please note that the battery, third-party SFP modules and SFP cages are not covered under warranty.
Summary of manufacturer’s warranty and warranty service
PHABRIX products will be supplied to the distributor with a manufacturer’s warranty in favour of the end-user of the product. Under the terms of PHABRIX’s warranty an end-user will be able to claim for any defect in material and workmanship for a period of 1 year from the date of new product shipment to the end-user. Under the terms of the warranty, PHABRIX will supply replacement parts for those which prove defective and warranty labour if the defective equipment is returned freight prepaid either to PHABRIX or to an approved factory service depot.
This warranty does not include responsibility for any transportation damage or handling damage or insurance costs.
1. Automatic product warranty will cover the first year from the date of invoice to the distributor’s end-user and end same date in the next calendar year.
2. Should the product develop a fault, the distributor will provide first line telephone support for the end-user to confirm the fault is technical and not operator error.
3. If the distributor considers the product to be faulty following their telephone support, the product must be returned to the distributor for visual examination to confirm the fault.
4. The distributor must then contact PHABRIX to discuss whether the product should be replaced from the distributor's stock or directly from PHABRIX.
5. If the product is faulty and cannot be repaired by the distributor, the distributor must obtain a Return Material Authorisation (RMA) number from PHABRIX before sending the faulty product to PHABRIX.
The warranty shall not apply if:
1. PHABRIX finds that the product or its component parts have been altered by unauthorised personnel;
2. the end-user installs, in the product, parts not made or supplied by PHABRIX, except such components specified by PHABRIX;
3. the product was used or installed in a manner other than in accordance with PHABRIX’s instructions;
4. the product is opened by the end-user.
Warranty Return Policy
If the product fails due to manufacturing defects, PHABRIX will either:
(a) repair the product; or
(b) replace the product.
Equipment Return Procedure
Before returning equipment to PHABRIX, the distributor or end-user must first obtain a RMA number from PHABRIX. All costs associated with shipping the product to PHABRIX shall be borne by the distributor or end-user, this includes freight, insurance as well as any and all brokerage fees and customs charges. The shipping costs associated with the return of the product to the distributor or end-user will be borne by PHABRIX.
Out of Warranty Repairs
PHABRIX will perform out of warranty repairs in accordance with its current service pricing schedule. All costs associated with shipping the product to PHABRIX shall be borne by the distributor or end-user, this includes freight, insurance as well as any and all brokerage fees and customs charges. The shipping costs associated with the return of the product to the distributor or end-user will be borne by PHABRIX.
Thank you very much for your recent purchase of PHABRIX Product, it is very much appreciated by everyone at PHABRIX.
The Rx simulator shows a simulation of the Rx2000 product. If you have a monitor of 1920 x 1080 resolution or greater, then you will be able to select the external LCD and arrange the window layout which would be visible on an external HDMI monitor on the Rx range.
Rx Simulator 09.04.14365 (18th January 2017): Please contact PHABRIX sales or your local sales partner if based outside of the UK for more information on the PHABRIX Rx range and to book a demonstration.
Rx Software & Manuals Releases
Please read carefully the PHABRIX Software End User Licence Agreement before downloading any software from this site.
Rx system software
To install this software on the Rx2000, Rx1000 or Rx500, download the zip file, extract the contents to the root directory of a USB pen drive then insert this into the front panel USB socket. See manual for further details on installing software.
|Version||Date||Software||Release notes||Rx 500/1000 Manual||Rx 2000 Manual||What's New|
|Current Version: Note that if your Rx system is running a version of software earlier than 9.01.12714 then new software will have to be installed manually to enable future automatic software updates.||9.04.14365||05/09/2016||Software Zip
||Changes||Rx1000 Manual||Rx2000 Manual||What's New|
|Note that Version 9 software does NOT support Version 8 and earlier Eye Modules (please contact your dealer for a free hardware upgrade.) Note also that Version 8 systems will not automatically download Version 9 software. This will have to be done manually.|
||Changes||Rx1000 Manual||Rx2000 Manual||What's New|
Rx and Sx Remote control SDK Documentation and Utilities
A setup application is provided to install the tools and documentation into the correct places
Tools are installed under the Start Menu and documentation and code examples are installed in MyDocuments\Phabrix\RemoteApiSDK.
|Version||For Software Version||Date||Utilities and Source||Documentation|
|2.3||0.08.xxxx ->||Date||Applications, Examples & Docs Installer
Simple FTP Client for the Rx range
A setup application is provided to install the FTP Client.
This application simplifies downloading of the latest version for networks where a Proxy server is used and Rx units do not have direct access to the internet. It can also be used for simpler downloading of Screen dumps or Report files from an Rx.
|FTP Client Version||Release Date||Software|