--------------------------
Version 0.6.2390 released
--------------------------

Download of new software fixed - was looking for setup.ini.

Scripts can now enable/disable logging.

Low Battery voltage dialog no longer pops up repeatedly if battery VERY low.

ANC status added to Engineering options to allow detection, display and decoding
of ancillary data packets.
 
If 1080p-3G standard selected on generator, SMPTE 352 is turned ON - it may be
subsequently turned off for testing.

If the generator is generating 1035i video signals, SMPTE 352 signal is no longer
output (with wrong data).

If SMPTE 352 is turned ON, can now use it to detect 1080sF input signals IF the
analyser is monitoring the input.

SMPTE 352 status display added to Signal info-Video Status page.

Aspect Ratio control (PAL only) moved to Analyser-Picture page

Fixed Memory save/load with selected groups.

Add ability to save/restore memory backup files which are application version independent.

Fixed so that memories group masks work correctly

Adding a new memory copies existing memory but addds '+' to end of name

Fixed SDI signal glitches if 3G-HD signal generated and analysed asynchronously

Show TRS words on Signal Data page in different colour

Fixed split/stream signal data displays.

Generator video standard shown in red if generating errors.

Can now select a single line for display in Waveform Monitor and Vector Scope modes.

Switching between field 1 and field 2 on analyser pages for an interlaced video
format now selects correct line in other field for SD video standards.

Can now specify aspect ratio that PAL signals are to be viewed in when viewing
in Picture mode or full screen view.