How to download this software to the unit:
==========================================
Downloading via the Internet:
The easiest way to download the software to an SX is to  
connect the SX to the internet using the Ethernet port.
Go to the System - Engineer page and press 'Download'. 
This will download the latest version.

Downloading from a computer:
If you are unable to connect the unit to the Internet, 
download the latest software using another computer 
which will be a zip file containing several files. 
Extract these files into a directory/folder on that 
computer and then use the Ethernet connection on the 
SX to FTP files into the 'setup' directory on the SX. 
Once all the files have been copied over you may 
install the software. If any files are missing, an error
message will be displayed on Installation.

Installing software:
Select the latest software version from the list given 
and press 'Install'. When the install has completed you 
will be prompted to re-start the SX using the Power 
on/off switch. Once the unit has re-started, if you are 
using a version of software prior to 0.09.2420, please 
install it again to get the latest version of Linux on 
the SX. Later versions of Sx software check this 
automatically.


New Features:
=============
* Event log can be set to beep when a log event occurs.
* Renamed Full Ramp as legal ramp as it only uses legal values.
* Added Full Ramp pattern which generates illegal values as well.
* Unit will not power up if battery voltage is too low 
  a warning message given until unit plugged into charger.
* Don't download software update if already downloaded 
  - a message given.
* Speaker may be set to silent source.
* Can now log internal system errors.
* Software update will now update Linux OS if required.
* Log message forced into log if Flash disk is read-only. 
  If this message is shown please see your dealer.

Fixed Bugs:
===========
* Web access to Sx no longer locks up if IP address of Sx 
  changed or DHCP mode changed.
* User pattern files now loaded while rest of GUI carries 
  on to improve user experience.
* Low Battery threshold voltages adjusted.