How to download this software to the unit:
==========================================
Downloading via the Internet:
The easiest way to download the software to an SX is to  
connect the SX to the internet using the Ethernet port.
Go to the System - Engineer page and press 'Download'. 
This will download the latest version.

Downloading from a computer:
If you are unable to connect the unit to the Internet, 
download the latest software using another computer 
which will be a zip file containing several files. 
Extract these files into a directory/folder on that 
computer and then use the Ethernet connection on the 
SX to FTP files into the 'setup' directory on the SX. 
Once all the files have been copied over you may 
install the software. If any files are missing, an error
message will be displayed on Installation.

Installing software:
Select the latest software version from the list given 
and press 'Install'. When the install has completed you 
will be prompted to re-start the SX using the Power 
on/off switch. Once the unit has re-started, if you are 
using a version of software prior to 0.09.2420, please 
install it again to get the latest version of Linux on 
the SX. Later versions of Sx software check this 
automatically.


New Features:
=============
* Script files can now pause for n seconds.
* Add more system logging for software updates.
* SMPTE 352 checkbox now stores state for SD/HD/HD-3G
* Show 'Z-bit error' message if embedded audio has incorrect Z-Bit
* Added Tartan Bars test pattern.
* Pluge pattern now has filtered edges.
* Pluge now has super black columns on left hand side
* Added ability to update u-boot during download.
* Fix potential problem with lost input on some units.
* Scripting tab now shows number of loops run and time spent running script.

Fixed Bugs:
===========
* EDH/CRC time now shows dd:hh:mm when over 24 hours
* SDI data view headings now get updated if video standard changes while page active.
* Script tab no longer gets confused about which script is loaded.
* Changing video standards with user files no longer stops user file from being displayed.
* Fixed occasional corruption of GUI screen if text ident used.
* EDH/CRC errors could get ignored after Clear ALL Error Count button pressed.
* Test patterns only get blanked and re-loaded if they really have to be.
* Fix some output corruptions when changing video standards/turning ident on/off quickly.
* Remove speaker silence source.
* Check for AC adaptor present when checking battery level at startup.