How to download this software to the unit:
==========================================
Downloading via the Internet:
The easiest way to download the software to an SX is to  
connect the SX to the internet using the Ethernet port.
Go to the System - Engineer page and press 'Download'. 
This will download the latest version.

Downloading from a computer:
If you are unable to connect the unit to the Internet, 
download the latest software using another computer 
which will be a zip file containing several files. 
Extract these files into a directory/folder on that 
computer and then use the Ethernet connection on the 
SX to FTP files into the 'setup' directory on the SX. 
Once all the files have been copied over you may 
install the software. If any files are missing, an error
message will be displayed on Installation.

Installing software:
Select the latest software version from the list given 
and press 'Install'. When the install has completed you 
will be prompted to re-start the SX using the Power 
on/off switch. Once the unit has re-started, if you are 
using a version of software prior to 0.09.2420, please 
install it again to get the latest version of Linux on 
the SX. Later versions of Sx software check this 
automatically.


New Features:
=============
* Added SMPTE 219 test patterns
* Improved support for NTSC inputs with different active field 
  length (ANSI/SMPTE 125M-1995 3.5.3)
* Faster startup
* Support .otf font files for text idents

Fixed Bugs:
===========
* 1080pSF user files now loaded from correct directory (1080yuv)
* MPF embedded audio flag fixed
* When event log cleared - now shows 0 of no events rather than -1